Skip to main content

How To Jailbreak Your Apple Device on iOS 8 Quickly

The Pangu team have today released a new version of the Pangu Untethered Jailbreak tool. Today's release brings the Pangu tool to v1.2 and only still available for Windows PC, although you can still jailbreak if you are on a Mac computer.

To jailbreak your Apple device untethered, please follow the following instructions

Warning
1. Jailbreaking your Apple device would cause you to lose your warranty on the device in case anything happens in the process, although a jailbreak is totally reversible. Furthermore, we are not responsible if you have any problem with your device during the jailbreak process, however, we are always here to help if you encounter any problem.

2. We advise you backup your phone via iTunes before you begin the process. After backing up, close iTunes completely.

3. DO NOT delete "com.apple.mobile.softwareupdated.plist" or disable the service. It will cause your devices unable to reboot.

Needed Item

  • Pangu Jailbreak Tool for iOS 8.0 - 8.1.x which you can download here
  • Make sure that your device was upgraded to the current firmware through iTunes and NOT through OTA update.
  • You can download firmware here
  • Windows Computer 
  • Supported Apple device: iPod Touch, iPhone 4S/5/5C/5S/6/6+, iPad mini 2/3, iPad/ iPad Air/
  • Device must be running iOS 8 - 8.1.x
Procedures
1. Go to settings and disable Passcode on your device

2. Next, go to Settings/General and set Auto-Lock to Never

3. Now go to Settings/iCloud and switch off Find My iPhone

4. Finally put your device in Airplane mode

5. Launch the Pangu Tool you downloaded, connect your device and let it be detected


6. Once your device is detected, click on "Start Jailbreak" button and click on the Already did button


7. Once you click on Already did, the jailbreak process will begin. Do not interrupt it or disconnect your device from computer.


8. Storage Almost Full will show up on your device. Dont panic and Don't touch your device because device will reboot and you will see the Pangu App on your device home screen.

9. Click on the Pangu app on your device home screen to see any information about the app. Also, the Cydia app will be installed just beside the Pangu app on your home screen. Click on the Cydia app.

10. Upon clicking on Cydia app, it will prepare Filesystem and then respring your device when done. You can launch Cydia again to access the Cydia store.

If you did all these, your device should be jailbroken untethered and you should be able to use your device like before without any problems.

Like or Facebook page and follow us on Twitter for more smartphone news

Comments

Popular posts from this blog

Tecno M3 Specifications and Features

Tecno is making the news again after a slight break. This time around Tecno have released a low-end smartphone called Tecno M3 for those that are on a tight budget.  This phone comes with 8GB internal memory card, USB adapter & charger, earphone and a plastic case. Although Tecno L3 and D3 are almost the same with M3, M3 has a better camera (5mp) with more swift feel especially when browsing. L3 on the other hand has a better battery performance but much slower internet speed. As we said in one of our posts, the 3 is a designation for low-end devices and the newly released L3 and M3 is proof of that. For a device of the price, feel and usage is smooth enough. Make sure you check the speaker of your M3 since some have reported that its not too clear. Below is the specifications of the M3 low-end smartphone. Network : the new M3 supports both 2G and 3G networks Connectivity : Bluetooth 3.0 with Advanced Audio Distribution Profile (A2DP). It also has

How To Root Tecno Phantom A (Tecno F7)

There are no limit to the possibilities one can achieve on a rooted Android device compared to one that isn't rooted. As you know, Rooting is to Androin as Jailbreak is to iOS. For those that don't know what rooting means, a little definition will suffice. Rooting basically means that you install a set of programs on your phone that gives you total control over your device. Total control means that you have the right to install any applications or even delete core applications that you don't want.  Simply put, you have administrative rights over your device, giving  you super user access, and of course, you can use DroidVPN to have free unlimited internet. The guide below shows how you can root Tecno Phantom A also known as Tecno F7 and its super easy to achieve. Don't forget to like us on Facebook. Requirements 1. Computer with internet connection 2. PdaNet+ V4.12 zipped file 3. eroot_v1.3.3 zipped file 4. USB to connect your device to the

How To Unbrick Tecno F7 Smartphone

About a week ago, a friend rooted his Tecno Phantom A smartphone. He was so excited about the endless possibilities to customize his device so he kept installing a lot of applications that caught his attention unaware of the dangers some apps can create on rooted smartphones. Finally, he installed an application called Font Changer Lite and that was when it all happened. After installing this app, his phone attempted to reboot and instead of booting normally, the phone froze at the Tecno logo. It wasn’t going passed that state. He couldn’t boot into his phone. Practically, his phone was bricked and had to look for a way to unbrick and use his phone again. If you are presently in the same limbo state as described, please follow the instructions below step by step to fix your device. I recommend reading through first before actually starting the process. Kudos to Seunpayne of Nairaland for uploading his files for download and also giving instructions on the usage.